Note that the total heat exchanger which when assembled
Release time:2015-08-21 Views:
Function and central air conditioning total heat exchanger want similar for regulating indoor air and humidity, so pay special attention when installing a total heat exchanger, Xiao Bian gave you today to share a few common full heat exchanger Installation matters:
Full installation of the heat exchanger is generally parallel and series two, there are three kinds of its orientation vertical, horizontal or inclined installation. Fins must be mounted vertically in a vertical position, otherwise it will cause water to increase the upper fins air resistance. To exclude cooler condensate, should be installed at its lower drip tray and drain. Then the cold surface heat exchanger total heat exchanger, heat medium pipe in parallel with the series also have the points, but when you do use steam heat medium heat exchanger each steam tube only parallel for water as cold, heat medium heat exchanger, the usual practice is to: with respect to the air passage of the heat exchanger in parallel its cold, heat medium pipe should also be connected in parallel; a series of heat exchangers its cold, heat medium pipe should also be connected in series tube. In-line can improve the water flow rate, hydraulic conditions conducive to the stability and increase the heat transfer coefficient, but the system resistance has increased.
Full installation of the heat exchanger is generally parallel and series two, there are three kinds of its orientation vertical, horizontal or inclined installation. Fins must be mounted vertically in a vertical position, otherwise it will cause water to increase the upper fins air resistance. To exclude cooler condensate, should be installed at its lower drip tray and drain. Then the cold surface heat exchanger total heat exchanger, heat medium pipe in parallel with the series also have the points, but when you do use steam heat medium heat exchanger each steam tube only parallel for water as cold, heat medium heat exchanger, the usual practice is to: with respect to the air passage of the heat exchanger in parallel its cold, heat medium pipe should also be connected in parallel; a series of heat exchangers its cold, heat medium pipe should also be connected in series tube. In-line can improve the water flow rate, hydraulic conditions conducive to the stability and increase the heat transfer coefficient, but the system resistance has increased.
Previous:Different types of total heat exchanger Next:Pay attention to what the use of new wind ventilators Heating
Related news
- Pay attention to [ 2015-08-21 ]
- Note that the tot[ 2015-08-21 ]
- Different types o[ 2015-08-21 ]